Directional Tank Cleaning Machines

Home

Directional Units

Directional Units

The Most Efficient and Effective Way to Clean

Open Top Vessels

The Gamajet IV, Gamajet VIII and Gamajet V Directional Cleaning machines are designed specifically for cleaning all types and sizes of open-topped vats, tanks, and vessels. These versatile units are turbine-driven and provide 180° rotary impingement cleaning 180 Degree Pattern to easily clean the sides and bottom of virtually any size application. With these cleaning machines, you get the cleaning power you need, in the direction you need it. A choice of nozzle sizes, turbines and gear speeds offer a range of flow rates, pressures and wash cycle times.

The 180º directional units still maintain Gamajet's rotary impingement cleaning process. This process allows for the machine to optimize the water or cleaning solution driving the device, providing the most force from the jet stream leaving the nozzles and contacting the interior of the tank. The machine then moves the jet streams in a rotational pattern to cover the entire inside of the tank or vessel in a repeatable and reliable manner. The design of the machine not only ensures durability but efficiency as well. A minimal and controlled amount of leakage allows the machine to clean itself, while the majority of the fluid reaches the actual contour of the tank, scouring and cascading bit by bit.

Benefits:

Sizes available to clean all size vessels
Direct the cleaning pattern where you need it most
Fluid driven, no external motor
Fast, low cost, reliable operation
Highly durable and efficient
Variety of pressure and flow rates
Clean more with less water and cleaning solutions

Directionals_1

Directional Units are Available for Gamajet IV, V and VIII

Gamajet Directional IV

Direct 1

et Directional IV is particularly well suited for removing heavy sediments in applications as diverse as waste treatment, adhesives and ink manufacturing.

The Gamajet Directional IV is offered in a triple nozzle configuration, with eight interchangeable nozzle sizes, six low or high pressure/volume hydraulic turbines, and two gear reduction ratios

Gamajet Directional V

Turbine driven, rotary tank cleaning machine, providing 180° coverage on the horizontal axis, with synchronized hydraulic jets providing concentrated bottom, top or side scrubbing of open-topped bins, totes, vats and other smaller-sized process vessels used by the food, beverage and pharmaceutical industries. The Gamajet Directional V is particularly well suited for removing heavy and viscous sediments such as creams, ointments and gels.

The Gamajet Directional V is offered in a dual nozzle configuration, with seven interchangeable nozzle sizes, and four low or high pressure/volume hydraulic turbines.

Operating Range:
Water Flow: 30 to 260 gpm (114 to 984 l/min)
Water Pressure: 40 to 450 psi (2.8 to 31 bars)
Temperature: Up to 240° F (116° C)

Overall Dimensions:
Height: 13 1/4“ (33.7 cm)
Width: Requires 12 1/2” (32 cm) diameter
minimum entry opening
Weight: 35 lbs. (15.89 kg)

Inlet Connection:
Standard: 2 1/2” NST male, 7.5 TPI; 2” NPT Female
Optional: 2 1/2” Quick Disconnect, Male: 2” NPT Female
Main Body Castings
and Components: 316 Stainless Steel

Operating Range:
Water Flow: 10 to 40 gpm (38 to 151 l/min)
Water Pressure: 50 to 1200 psi (3.5 to 8.3 bars)
Temperature: Up to 250°F (121°C)

Overall Dimensions:
Height: 8 13/16” (22.4 cm)
Width: Requires 4 3/8” (11.11 cm) diameter
minimum entry opening
Weight: 8 1/2” lbs. (3.9 kg)

Inlet Connection:
Standard: 1 1/4” NPT Female
Main Body Castings
and Components: 316 Stainless Steel